Tabla de contenido
Factory reset
Restore factory settings
Device reboot
Reboots the Shelly Motion.
Device info
Connectivity settings and ID of the device.
Battery lifetime and optimisation
Shelly Motion sensor is a battery-powered device that is perma-
nently connected to the Wi-Fi network and the Internet. In stand-
by mode it can reach up to 3 years of operation without recharg-
ing and in cases of active movement between 12 - 18 months.
However, in order to be able to achieve the specified operating
times in it is extremely important to comply with the following
requirements:
1. Mount the sensor in place with a strong enough WiFi signal. It
is desirable that the RSSI be better than -70 dB.
2. Do not open the local page of the device unnecessarily. It is
not designed to continuously exchange data to read its settings
and status. In case of an event, device will immediately send the
necessary information to Cloud, Local Server or execute Actions.
If you have opened the local page, close it as soon as you make
changes to the settings you want.
3. If the device is set in a place where there is frequent movement,
consider whether it is necessary to report it 24/7 or only at certain
time intervals, if so, create a Weekly Schedule when to send the
information about that.
4. Do not place the device outdoor in direct sunlight, high humidity
or the risk of water droplets falling on it. Shelly motion sensor is
made for Indoor usage or in well covered places.
User and Safety guide
39
Tabla de contenido
