Tabla de contenido
devices directly:
https://shelly.cloud/documents/developers/ddd_communication.pdf
and
https://shelly-api-docs.shelly.cloud/
The following options for performing URL action are possible:
• Motion detected
• Motion detected in dark
• Motion detected in twilight
• Motion detected in bright
• End of motion detected
• Tamper alarm detected
• End of tamper alarm
Each of them supports up to 5 URLs that will be executed when
motion is detected, end of motion or vibration. In addition, each of
the 5 action URLs can be limited in time. This allows you to set the
sensor to control the light intensity (if you use a Shelly Dimmer or
other device with similar capabilities) to be specific to different
times of the day. You can also control any other device according
to the time of day.
Settings
Led light control
Тo turn off the light indication when motion or vibration is detect-
ed.
Firmware update
Check for a new firmware version and update it.
⚠ATTENTION! Do not reboot the sensor until Firmware update
is finished. Flashing Blue light followed by 1 minute no light and fi-
nal Blue/Red/Green sequence is indication of successful firmware
update.
Time zone and geo-location
Change your Timezone and set a new location.
Device name
Use a friendly device name, if you use Shelly Cloud APP the name
can be automatically populated.
38
User and Safety guide
Tabla de contenido
