Recommended Fire¬Extinguishing Devices; Glossary - SATA AE1032H Manual De Instrucciones

• wash frequently with soap and water; do not use cleaners or solvents that can irritate your skin or remove its natural
protective oil;
• do not dry hands with dirty or greasy rags;
• change clothing if impregnated with oil, and in any case at the end of every working shift;
• do not smoke or eat with greasy hands.
- Also adopt the following preventive and protective equipment:
• gloves resistant to mineral oils, with lining;
• goggles, in case of splashes;
• aprons resistant to mineral oils;
• screens to protect against oil splashes.
Mineral oil: first aid procedures
- Swallowing: seek medical attention, pro¬viding the characteristics of the type of oil swallowed.
- Inhalation: in case of exposure to high concentrations of fumes or mists, take the affected person to the open air and
seek medical attention immediately.
- Eyes: rinse with plenty of running water and seek medical attention as soon as possible.
- Skin: wash with soap and water.
15. RECOMMENDED FIRE¬EXTINGUISHING DEVICES
For guidance on the most suitable type of extinguisher, refer to the table below:
Dry mate¬rials
Water YES
Foam YES
Powder YES
CO2 YES
YES* Use only if more appropriate extinguishers are not at hand or when the fire is small.
WARNING
This table contains general instructions intended to be used as guidelines for users. Contact the
manufacturer for details of the applications of each type of extinguisher.

16. GLOSSARY

Air delivery reaulator.
Union allowing regu- lation of the air flow.
Beading.
Operation which takes place du- ring inflation and ensures
perfect centring between the bead and the rim edge.
Bead breaking.
Operation in which the bead of the tyre is detached from the
edge of the rim.
AE1032H
Flam¬mable liquids
NO
YES
YES
YES
Electrical equipmen
NO
NO
YES
YES
Bead pressing grtpper.
A tool intended for use when mounting the top bead. It is
fitted so that it grips the shoulder of the rim and holds the
tyre top bead inside the drop centre. It is generally used
for mounting low profile tyres.
Tubeless Inflator.
An inflation system which simplifies inflating tubeless
tyres.
83
- 03 -
EN DE RU KO PT JA ES