CHARGING THE boomSTREAM
Note: the boomSTREAM will need to be fully
charged prior to initial use (approx. 3.5 hours).
1. Connect the micro-USS end of the charge
cable to the micro-USB port on the
boomSTREAM (Figure 1, "A").
2. Connect the USB end of the charge cable to the � r -
USB port of a computer or AC adapter (not included).
3. The LED indicator (Figure 1, "B") WIii turn sohd RED
while charging and become solid GREEN when
charge 1s complete
CHARGEMENT DU boomSTREAM
Remarque: Le boomSTREAM ne sera pas ent,erement
charge avant la premiere ut1hsat1on (env. 3,5 heures).
1. Branchez /'extrem,te m,cro-USB du cable de charge
au port m,cro-USB sur le boomSTREAM (Figure 1, •A»).
2. Branchez l'extremite USB du cable de charge au port USB d'un ordinateur
ou d'un adaptateur CA (non inc/us).
3.
Le temoin lumineux DEL (Figure 1, • B ») deviendra rouge continu /ors du
chargement et vert continu lorsque le chargement sera termine.
RECARGA DEL boomSTREAM
Nota: el boomSTREAM debe estar completamente cargado antes de su uso
inicial (aprox. 3,5 horas).
1. Conecte el extrema micro-USB def cable de carga a la entrada micro-USB
de/ boomSTREAM (Figura 1,
2. Conecte el extrema USB de/ cable de carga al puerto USB de una
computadora o de un cargador de CA (no incluido).
3.
El LED indicador (Figura 1, "B'? se encendera en ROJO s6/ido mientras este
cargando, y se vo/vera VERDE s6/ido al terminar la carga.
PAIRING THE boomSTREAM
Note: the following are general pairing
instructions. Devices may vary. Consult your
devices's Bluetooth pairing instructions.
1. Press and hold the 8/uetooth button
(Figure 2, "B"). After 5 seconds, the
speaker will enter pairing mode and the
8/uetooth status button will begin
to flash quickly.
2. In your device's Bluetooth menu search for
and select "SCOSCHE BTSPK2".
3. When pairing is complete, you will hear two
beeps and the 8/uetooth status button will
begin to flash slower.
"A'?-
3
-" � - _L - -
-
-1
_ _
= �
-
_ ..,
., =
::r'
= =
�
D
FIGURE2
FIGURA2
