weasy KFX32 Manual De Instrucciones página 8

Steam and frothing function
1. Press the 'steam on/off button', the upper indicator light turns red flicker.To wait untill the light
turns to continuous illuminates from fliker,the pre-heat is finish.
2. Pour the 'whole milk' into the 1/3 of the frothing cup and insert the steam nozzle into 1CM
from surface,then turn the steam knob slowly until steam starts to blow out.
(Note: the degree of steam can be adjusted according to the proficiency of the individual. We
suggest to release a little bit moisture before you froth the milk.)
3. When the temperature of milk reaches to about 75 degrees(and the milk bubble begins to
expand), you can stop the steam by turnning the steam knob to "OFF" position and press the
'steam button'. The indicator light will turn to blue color.(Or you can also press 'on/off button' to
turn off the machine)
Remark: after you frothed the milk,to clean the milk on the surface of the steam nozzle with a
damp cloth duly,and then spray steam to prevent the hole inside the nozzel will be blocked after
the milk was dried.
Hot water function
1. Press the 'on/off button', the upper indicator light turns to flicker with blue color,it means the
machine is pre-heating.To wait untill the light turns to continuous illuminates from fliker,the
pre-heat is finish.Turn the knob to 'on' position untill there's water is flow out from the steam
nozzle.The water can use for drinking,cleaning or warming the cups.
2.After that ,you can turn the knob to 'off' position,then press'on/off button'again to turn off the
machine.