Initial Use - Beurer BY 90 Instrucciones De Uso

6. Initial use

Inserting the batteries
Before using the baby scale, you must first insert three 1�5 V AAA batteries into the battery
compartment of the baby scale�
Proceed as follows:
1� Open the battery compartment cover on
the bottom of the baby scale�
2� Insert three 1�5 V AAA batteries into the
battery compartment� Make sure that the
batteries are inserted the right way round
(+ / –), as shown in the battery compart-
ment�
3� Close the battery compartment cover until you hear and feel it click into place�
Note
The batteries must be replaced when " Lo " appears on the display�
Initial use with the app
You can transfer the measured weight values to your smartphone via Bluetooth
"beurer BabyCare" app�
Keep the smartphone close to the scale in order to maintain an active Bluetooth
during initial use�
To connect the baby scale to the smartphone, proceed as follows:
1� Activate Bluetooth
Note: Bluetooth
of the Bluetooth
2� Download the free "beurer BabyCare" app from the Apple App Store (iOS) or from Google Play
(Android™)�
3� Start the "beurer BabyCare" app and follow the instructions�
4� Enter user data�
The following settings must be set or entered in the "beurer BabyCare" App:
User data
Date of birth
5� Insert the batteries and place the baby scale on a solid surface�
6� For 120 seconds the baby scale shows "app" in the display and can be connected to the
"beurer BabyCare" app�
Note: If you have not connected the baby scale with the app during initial use, "app"
flashes for 10 seconds when the scale is switched on again� The indicator is no longer
displayed once synchronisation with the app is successful�
7� The baby scale is successfully connected to the app once the Bluetooth
appears in the display�
8� Now place the baby on the weighing surface� Do this very carefully; do not let the baby fall
and take particular care with the baby's head�
in your smartphone's settings�
®
devices, such as this scale, may not be visible in the general settings
®
device list�
®
Set values
DAY, MONTH, YEAR
17
with the
®
connection
®
symbol
®