Initial Setup - swissflex uni 11-45 Modo De Empleo

uni 11_45 interactive
Pneumatic ball handle
1 Cable mounting plate
2 Cable straps
3 Wooden cross-beam
4 Pneumatic ball handle
5 Pressure cylinder
6 Screws
7 Cable
Comfort and health
Welcome to the world of Swissflex!
The uni 11_45 interactive offers an ergonomically cor-
rect and individual sleep experience with a unique and
luxurious visual appearance. Please read these in-
structions carefully to guarantee a safe and efficient
operation.

Initial setup

The uni 11_45 interactive works exclusively through the
shifting of body weight – without the need for a con-
nection to an external energy source. The body move-
ment is enforced by an integrated pressure cylinder (5),
which is safe to operate, maintenance-free and silent.
8
Operating instructions
6 1
4
Positioning of pneumatic ball handle (4)
Whilst the uni 11_45 interactive sit-up bed is fitted
with a pneumatic ball handle (4) to the right as stan-
dard, it can also be used in a double bed.
In double beds, the pneumatic ball handles (4) must
be positioned on the outside. For this reason, the pneu-
matic ball handle on one of the uni 11_45 interactive
must be repositioned.
To change the position of the pneumatic ball handle
Loosen the 2 screws on the cable mounting plate (1).
Cut the two cable straps (2) fixing the cable to the
uni 11_45 interactive. Guide the pneumatic ball handle
under the pressure cylinder (5) to the opposite side and
fix the cable mounting plate (1) with the 2 screws (6) in
the designated location. Arrange the cable (7) in large
5
2 3 7
GB