Hardware Components; Getting Started; Operating Basics - McElroy DATALOGGER 7 Guia De Inicio Rapido

DataLogger

7 Hardware Components

®
Front and Back Features
1
2
3
4
1 Notification LEDs
2 Touchscreen and Display
3 Protective Over-molded Bumper (all four
edges)
4 Microphone (one on each side)
5 Ambient Light Sensor
6 Front Facing Camera Lens, 2 MP
7 Keypad
8
Power Key
9
Rear Facing Camera Lens, 16 MP
Battery Compartment
and Card Slots
1
2
1
Battery Pack, Removable
2 Battery Door
3 Micro SIM Card Slot and Micro SD/
SDHC Card Slot (under card retainer)
4 Flexible Card Retainer
5 Battery Compartment
6 Docking Port Connections
5
9
6
10
11
12
13
7
14
8
15
10 Camera Flash
11 Speaker
12 Battery Door Lock
13 Battery Compartment, SIM and SD Card
Slots
14 External Device Attachment Point (1 of 3
on the back)
15 Storage Slot for Fine Tip Stylus
16 Switchcraft Connector Port
Connector
Ports
8 9 10 11
3
4
6
5
12
13
7
7
Hand Strap Attachment Point
8 USB-C, USB 3 . 1 , 5 V 1 .5 A Max Output
9 USB 2 .0 Host, 5 V 500 mA Max Output
10 12 VDC Power Input Jack
11 Storage Slot for Fine Tip Stylus
12 Connector Port Protector
13 Transducer and Cable
1

Getting Started

Installing the SIM Card (Optional)
1 . Slide the battery compartment lock to the
unlocked position .
16
B
A
2 . Remove the compartment door . Remove
the battery . The Micro SIM and SD cards
slots are under the battery . Pull flexible card
holder out of the way .
3 . Insert SIM card into the proper slot . Push
flexible card holder back into place .
4 . Replace the battery and reattach door
and lock . Activate SIM card per carrier
instructions .
Charging the Battery
Connect the AC adapter to charge the battery .
The LED battery charge indicator blinks red
when the unit is plugged in and the battery is
charging . The LED indicator will be solid red
when the battery is charged (not charging) .
Performing the Initial Startup
1 . Press the power button to turn on your
device .
2 . Follow the on-screen instructions to
complete the setup process .
After the setup is completed, the Home
screen appears . You can now use your
device .
3 . The tablet will include a formatted and
installed SD card from McElroy . If a new SD
card is installed, you will need to format the
card to use with the device .

Operating Basics

Waking Up
Your device sleeps after a period of inactivity .
To wake up, press the power button and, at the
lock screen, drag the lock icon to the other side
of the screen .
Flexible
Shutting Down
Card
Holder
To shut down, press and hold the power button
until a menu pops up . Touch Power off and then
OK .
Home Screen
The Home screen is your starting point to access
all the features on your device .
Navigation bar:
opens a screen containing thumbnails of
application you've used recently .
opens the Home screen .
goes back to the previous screen .
2