Wifi Network Configuration - Archos 5 Manual Del Usuario

5g+
1.
Configuration status:
2.
The name of the network (SSID), if it is broadcasted (if the SSID is not broad-
casted, you will be prompted to enter it in the next configuration screen).
3.
The strength of the signal.
4.
The type of encryption key that is required:
Open network (no key)
5.
The channel used by the network.
6.
The type of network (Infrastructure or Ad-Hoc). Ad-Hoc networks are not sup-
ported at this time.
• Select the network that you want to connect to (your home wireless network or
a free hotspot).
• You will be taken to the configuration screen for this network, where you will
have to enter some information to set up your access to this network.
Note: the ARCHOS is also compatible with WPS (WiFi Protected Setup) net-
works. Check with your network manager.

WIFI NETWORK CONFIGURATION

In order to connect to a wireless network, the ARCHOS will need some specific informa-
tion about the network. Your device will automatically pick up certain pieces of infor-
mation that it needs from the WiFi hot spot. You can enter the rest of the information
manually in the network's configuration screen, as shown in the following sections.
Note that your device will remember the network connection information that
you enter, in order to re-use it and connect automatically to the network when
it is in range.
FCC
MANUAL
configured network
WEP key
CONNECTING TO THE WIFI > P. 33
unconfigured network
WPA key WPA2 key