General Safety Directions For Power Tools - Deltafox DP-EAG 7525 Traducción Del Manual De Instrucciones Original

GB
Symbols used in the instructions:
Hazard symbols with informa-
tion on prevention of personal
injury and property damage
Precaution symbol with information
on prevention of harm / damage.
Pull out the mains plug.
Connect the machine to the power
supply.
Notice symbol with information on
how to handle the device properly.
General Safety Directions for
Power Tools
WARNING! READ ALL SAFETY
DIRECTIONS AND INSTRUC-
TIONS. Omissions in the compli-
ance with safety directions and
instructions can cause electrical
shock, fire and/or severe injuries.
Retain all safety directions and instruc-
tions for future use.
The term „power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool).
Work area safety :
Keep work area clean and well lit.
•
Cluttered or dark areas invite acci-
dents.
Do not operate power tools in ex-
•
plosive atmospheres, such as in the
presence of flammable Iiquids, gas-
es or dust. Power tools create sparks
which may ignite the dust or fumes.
26
Keep children and bystanders away
•
while operating a power tool. Dis-
tractions can cause you to lose con-
trol.
Electrical safety :
Power tool plugs must match the
•
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power
tools. Unmodified plugs and match-
ing outlets will reduce risk of electric
shock
• Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of elec-
tric shock if your body is earthed or
grounded.
Do not expose power tools to rain
•
or wet conditions. Water entering
a power tool will increase the risk of
electric shock.
• Do not abuse the cord. Never use
the cord for carrying, pulling or un-
plugging the power tool. Keep cord
away from heat, oil, sharp edges or
moving parts. Damaged or entan-
gled cords increase the risk of electric
shock.
• When operating a power tool out-
doors, use an extension cord suit-
able for outdoor use. Use of a cord
suitable for outdoor use reduces the
risk of electric shock.
If operating a power tool in a damp
•
location is unavoidable, use a resid-
ual current device (RCD) protected
supply. Use of an RCD reduces the
risk of electric shock. Use a circuit
breaker with a current limit of 30 mA or
less.