Instruction For Use; Start And Stop; Charging The Battery - Nilfisk Handy Instrucciones De Uso

tive fl oors.
• Empty the product after
each use. Keep it free of
dust, lint, hair, or anything
that reduces airfl ow.
• Keep hair, loose clothing,
and body parts away from
openings or moving parts,
especially the part of the
product where there is suc-
tion.
• Never place the vacuum
nozzle near your face, es-
pecially eyes and ears, dur-
ing operation.
• Do not use the product
without the fi lters and the
dust container in place.
• Take care when using the
product on stairs in order to
prevent falls.
• The battery charging termi-
nals on the vacuum cleaner
and the charging base
must be kept clean and
free of debris.
• Only use the charging base
and AC adapter provided
with the product. Do not
use any parts not provided
or recommended by Nilfi sk.
3. Instructions for Use

3.1 Start and Stop

3.1.1 Start
Switch ON the unit by switching the On/Off button
downwards.
Please fully charge the battery before using the
product for the fi rst time.
• Please switch OFF the product when the bat-
tery is empty. The battery will be damaged if
the product is stored in "ON" position.
• NiMH models: The battery is fully charged after
16 hours. Prolonged charging can reduce the
life time of the battery and is not optimal for the
environment.
3.1.2
Stop
Switch OFF the unit by switching the On/Off but-
ton upwards.
3.2 Prepare your Vacuum Cleaner
1. Make sure the switches are in "OFF" Position.
2. Place the Nilfi sk Handy into the charging stand
for fi rst charging (r efer to the charging section).
3.3 Indication light (Li-lon models)
Battery full
Battery below 20%
Battery low

4. Charging the Battery

Make sure to charge the battery in the following
situations:
• When using the product for the fi rst time after
purchase;
• When the battery is low or the suction power
reaches an insuffi cient level;
• When the product has been stored for a pro-
longed period (more than a month).
•
4.1 Wall Mounting for charging base
Your Handy is designed to hang vertically on the
wall with handle end pointing downward. When
wall mounting, care should be taken to ensure
that there are no dangerous objects hidden be-
neath the wall surface (e.g. electrical wires, pipe,
etc.) Use a 5 mm drill for drilling holes for the
plastic anchors. Then, insert anchors and screw
the charging base onto the wall.
We recommend that you position your Handy
close to an electrical outlet. Then plug the charg-
ing plug into the socket at the side of the charg-
ing base.
4.2 Place the Nilfi sk Handy in the
charging stand
If the Nilfi sk Handy is not placed properly in the
charging stand, it will not be charged or it may
topple over.
Be careful not to trip over the power cable when
charging the battery.
Handy
Blue light on
Blue light fl ashing
Red light fl ashing
5
EN
DE
FR
ES
PT
IT
NL
SV
NO
DA
FI
EL
TR
CS
SL
HU
RO
BG
PL