Using The Blender - TEFAL EVIDENCE BL536161 Manual Del Usuario

• Use only original components and accessories. The manufacturer cannot accept any liability if this is
not the case.
• Make sure the lid (B) is properly locked onto the blender jug (C) before operating the blender.
• When mixing hot liquids, remove the measuring cap (A) so that the steam can escape.
• Do not remove the lid (B) before the blades have completely stopped.
• Switch off the appliance and disconnect from supply before changing the accessories.
Caution: never pour or blend liquids or ingredients where the temperature is higher than 80°C. When
blending hot ingredients, keep hands well away from the lid and measuring cap in order to avoid
any risk of burns.
Before using your blender for the first time
• Before using the appliance for the first time, clean all the accessories in warm water and a little
washing-up liquid (except for the motor unit: see "Cleaning" §). Rinse and dry them carefully.
• Ensure that all packaging has been removed before using your appliance.
• Make sure that the seal (E) is properly positioned onto the blade holder base (F) (Fig. 1).
1. Lock the blade holder (F) onto the blender jug (C) by giving it a quarter turn (fig. 2), without
forgetting the seal (E).
2. Place the spoon holder (G) on the motor unit (H) (Fig. 3).
3. Place the jug (C) on the motor unit (H) (Fig. 4). Two positions are possible: handle to the left or handle
to the right.
4. Place the ingredients to be mixed into the jug (C), starting with the liquid ingredients without ever
exceeding the maximum level (1.25 l) (Fig. 5).
5. Lock the lid (B) on the jug (C). The lid (B) and its measuring cap (A) must always be fitted properly
when the appliance is operating (Fig. 6). Use either the opening in the lid (B) or the spoon (D) to add
ingredients (Fig. 7).
Using the different functions of the blender :
CONTINUOUS OPERATION: speeds 1 to 5
Depending on the speed selected, the blades rotate at different speeds. Whatever the speed selected,
the start-up is gradual thanks to the electronic card which controls the blender, in order to optimise the
blending.
It is possible to change the speed by simply pressing another button. The operating time for each speed
is automatically limited to 1 minute; you can restart the blender if your mixture is not quite ready.
6

Using the blender