Declaration Of Conformity - Felisatti SD230/2200 Instrucciones De Servicio

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 11
Wear safety goggles.
Use suitable detectors to determine if utility lines are
hidden in the work area or call the local utility company for
assistance. Contact with electric lines can lead to fire and
electric shock. Damaging a gas line can lead to explosion.
Penetrating a water line causes property damage or may
cause an electric shock.
When working stone, use dust extraction. The vacuum
cleaner must be approved for the extraction of stone dust.
Using this equipment reduces dust-related hazards.
When working with the machine, always hold it firmly
with both hands and provide for a secure stance. The
power tool is guided more secure with both hands.
Secure the workpiece. A workpiece clamped with
clamping devices or in a vice is held more secure than by
hand.
Never use the machine with a damaged cable. Do not
touch the damaged cable and pull the mains plug when the
cable is damaged while working. Damaged cables increase
the risk of an electric shock.
Do not use the tool when tired or under influence of
drug, alcohol or medicine.
Never put fingers on the switch button while moving
the tool to avoid unintentional starting of the tool.
Ensure the mounting screws and other assemblies
are fixed properly and securely before operate the tool.
Turn on the switch and let the tool work for 30 second in a
safe position. Stop immediately if considerable vibration or
other defects are detected, have it repaired.
Other safety information
Be sure the power supply is same as the voltage given
on the rating plate. The tool is fitted with a two-core cable
and plug.
Remove the power plug from socket before carrying
out any adjustment or servicing.
Residual risks
Even when the power tool is used as prescribed
it is not possible to eliminate all residual risk
factors. The following hazards may arise in connection with
the power tool's construction and design:
-
Damage to lungs if an effective dust mask is not worn.
-
Damage to hearing if effective hearing protection is
not worn.
-
Damages to health resulting from vibration emission if
the power tool is being used over longer period of time or
not adequately managed and properly maintained.
WARNING!
This
electromagnetic field during operation. This field may under
some circumstances interfere with active or passive medical
implants. To reduce the risk of serious or fatal injury, we
recommend persons with medical implants to consult their
physician and the medical implant manufacturer before
operating this machine.
6
power
tool
produces

DECLARATION OF CONFORMITY

12
Business name of the manufacturer:
INTERSKOL POWER TOOLS S.L.
Full address of the manufacturer
Ctra. de St. Joan de les Abadesses, s/n
17500 RIPOLL (Girona) SPAIN
Name and address of the person
(established in the Community) compiled
the technical file:
Jordi Carbonell, Santiago López
Ctra. de St. Joan de les Abadesses, s/n
17500 RIPOLL (Girona) SPAIN
Product name: Wall chaser
Commercial name: Wall chaser
Model: SD230/2200, SD230/2600E
Type: Electric power tools
Serial Number: see label of the tool
Fulfils all the reevant provisions of
Directives 2006//95/EC, 2006/42/EC,
2004/108/EC, 2002/96/EC, 2002/95/EC,
2009/251/EC
We hereby declare, under our sole
responsibility, that the FELISATTI brand
products described in this manual
SD230/2200, SD230/2600E comply with
the following standars:
EN60745-1,
EN55014-2, EN61000-3-2, EN61000-3-3.
Jordi Carbonell
We reserve the right to make technical changes 12/2012
an
EN60745-2,
EN55014-1,
Santiago López
Tabla de contenido
loading

Este manual también es adecuado para:

Sd230/2600e

Tabla de contenido