User Keypad & Whirlpool Modes/Features; Optional Remote Control - Kohler K-870 Manual Del Propietário

User Keypad and Whirlpool Modes/Features
S
Power- Turns the whirlpool pump on and off. Symbols illuminated in blue indicate available modes/features.
Modes which are operating will be illuminated in green.
S
Outer Ring- Rotate the outer ring to the desired mode. The selected mode will flash (blue).
S
Activate Button- Press "OK" to activate the desired mode. The desired mode will no longer flash, but will be
illuminated (green).
S
Up Arrow- Increases the water flow when the Flexjet mode is active. Increases the pulse speed when the neckjet
mode is active.
S
Down Arrow- Decreases the water flow when the Flexjet mode is active. Decreases the pulse speed when the
neckjet mode is active.
S
Flexjet Mode- When illuminated, this mode allows you to adjust the water flow by pressing the up or down
arrows.
S
Neckjet Mode- When illuminated, the neckjets are operating and you may adjust the pulsing speed by pressing
the up or down arrows.
S
Heater- The heater automatically engages when the whirlpool is turned on. To turn the heater off, rotate the outer
ring until the heater mode is flashing and press "OK". Press "OK" again to turn the heater back on. The heater
will help to maintain the water temperature up to 104_F (40_C).
S
Indicator Bar- Shows the water flow volume in the Flexjet mode. Shows the pulse speed in the neckjet mode.

Optional Remote Control

If you purchased a remote control, please refer to the Homeowners Guide packed with your remote control for
detailed information.
Kohler Co.
Activates Mode
Selected
Flexjet
Flow Mode
Rotate outer
ring to access
desired mode
Power Power
On/Off
Increases
Flow or
Pulse
Neckjet Mode-
Adjust Pulse
Indicator Bar-- Shows
Water Flow Volume
or Pulse Speed
Decreases
Flow or
Pulse
Heater
On/Off
5
B
1019488-5-