Cooke & Lewis CLPYRO65UK Manual Del Usuario página 53

Care and Maintenance 53
Replacing bulb
WARNING! Let the bulb cover cool before replacing bulb.
Note: Replace only with bulbs resistant to high temperatures with the following specification: 25-40 W
220-240 V, T300 °C halogen bulb.
Replacing the bulb
1. Disconnect power from the mains outlet or switch off the circuit breaker at the consumer unit.
2. Unscrew the glass lamp cover by turning it counter-clockwise (note, it may be stiff) and replace the bulb
with a new one of the same type.
3. Screw the glass lamp cover back in place.
Cooling fan operation
When cooking is finished, the cooling fan still operates for a short while until the oven has cooled
below 75 ºC.
Troubleshooting: E01 error
Once a broken circuit or short circuit of the temperature sensor is detected, the error code E01 is shown
on the display. If this happens, proceed as follows:
1. Disconnect the power, and check if the cable, its connection and electrical socket is not damaged.
2. If the error code is still displayed, contact the Customer Services helpline shown in this manual.
Customer helpline (toll free)
UK 0800 324 7818 [email protected]
Eire 1-800 932 230 [email protected]