Fiap 1550 Manual Del Usuario página 3

FIAP Pendelfütterer
GB
Information about this operating manual
Please read the operating instructions and familiarise yourself with the unit prior to using it for the first
time. Adhere to the safety information for the correct and safe use of the unit.
Intended use
FIAP Pendulum Feeder, called in the further device is intended for use as fish feed machine.
Use other than that intended
Danger to persons can emanate from this unit if it is not used in accordance with the intended use and
in the case of misuse. If used for purposes other than that intended, our warranty and operating permit
will become null and void.
CE Manufacturer's Declaration
We declare conformity in the sense of the EC directive.
The following harmonised standards apply: EN 61058-1, EN 60669-2-1.
Safety information
FIAP has manufactured this unit according to the highest quality standards and the valid safety
regulations. Despite of the above, hazards for persons and assets can emanate from this unit if it is
used in an improper manner or not in accordance with its intended use, or if the safety instructions are
ignored.
For safety reasons, children and young persons under 16 years of age as well as persons, who
cannot recognise possible danger or who are not familiar with these operating instructions, are
not permitted to use the unit!
Please keep these operating instructions in a safe place! Also hand over the operating instructions
when passing the unit on to a new owner. Ensure that all work with this unit is only carried out in
accordance with these instructions. The combination of water and electricity can lead to danger for life
and limb, if the unit is incorrectly connected and misused.
Do not use the unit in or under water. Never open the unit housing or its attendant components, unless
this is explicitly mentioned in the operating instructions. Compare the electrical values of the power
supply with those on the type plate on the packing or on the unit itself. For your own safety, consult a
qualified electrician when you have questions or encounter problems! Protect the connection cable
when burying to avoid damage. Only use cables approved for outside use. Protect the plug connection
from moisture.
Technische Änderungen vorbehalten. Für Druckfehler übernehmen wir keine Haftung. WEEE-Reg. Nr.: DE78152045
FIAP GmbH, Jakob Oswald Str. 16, 92289 Ursensollen
Tel: 09628 9213 0; Fax: 09628 9213 30;
5
www.fiap.com
FIAP Pendelfütterer
FIAP Pendulum Feeder is operated without current vi adaptor with a pendular system. The discharge
pipe´s mechanical turning allows for steplessly adjusting the fodder quantity. The required amount of
feedingstuffs depends on the fish activity. As needed, the container can be filled with the fooder
required for several days (3, 10, 20, 40 or 60 kg). Under water contact with pendulum will release the
feedingstuffs (pellets in a size from 2 to 10 mm). FIAP Pendulum Feeder is thus suitable for the
consistent feeding of all fish species, and is available in 5 different versions.
As accessories, we offer retaining ring, swivel arm, and pipe penetration. FIAP Pendulum Feeder
serves to optimize your fish farm´s feedingstuffs ratio.
Cleaning
To ensure a good continuity with the feedings, FIAP Pendulum Feeder during the season now and
again to be cleaned. Remove with a small brush the dust and food residues from the FIAP Pendulum
Feeder Container and System.
Store / hibernate
Clean for the winter and dry the food container and keep the equipment until the following spring in a
dry and frost-free place.
Disposal
The device should be disposed of in accordance with national law. Check with your dealer.
Technische Änderungen vorbehalten. Für Druckfehler übernehmen wir keine Haftung. WEEE-Reg. Nr.: DE78152045
FIAP GmbH, Jakob Oswald Str. 16, 92289 Ursensollen
Tel: 09628 9213 0; Fax: 09628 9213 30;
6
www.fiap.com