How To Use The Machine; Quality Control - Master Trimmers MT Standard 50 Manual De Uso Y Mantenimiento

How to use the machine

Once assembled and connected to the electrical current, the machine is ready to be used.
IMPORTANT: The use of ear and eye protectors is recommended.
Put a safety gauntlet on the hand that will be used to hold the
1
branch to be treated, and with the other, press the on/off switch
to turn on the machine. Leave the switch in the ON position.

Quality control

Check the appearance of the branch once the previous process has been completed, and if the desired result is not
obtained, repeat the process.
Remove the material from the bag
First, press the ON/OFF switches on the machine to turn it off.
1
Then disconnect it from the electrical current by unplugging
it. IMPORTANT: The machine must be stopped and
disconnected before manipulating it.
ON/OFF
Remove and empty the contents of the bag. The bag can be
3
washed in the washing machine, or by soaking it with the Master
Clean liquid from the cleaning kit and scrubbing it by hand.
IMPORTANT: NEVER remove the protective grid from the blades until the blade movement has stopped.
Take a freshly harvested branch and slide it over the grid in "zig-
2
zag" movements.
Once flowers have been cut off as desired, remove the branch.
3
4 Repeat the process with a new branch.
Once the work session is finished, turn off the machine by
5
pressing the on/off switch to leave it in the OFF state.
Pull the bag upwards at first to unhook the ring from the supports
2
and then downwards to remove it.
Once the cleaning/maintenance operations have been carried out,
4
replace the bag by reversing the previous steps.
www.masterproducts.es
25