Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3.1.1 c
/f
hAnging
itting the tool
Hold spindle by wrench flats with open end wrench and
release/tighten down collet chuck with open end wrench.
3.2 w
orking instructions
To achieve an optimum result, move grinding tool
uniformly back and forth with light pressure. Ex-
cessive pressure lessens the working capability of
the machine, as well as the life of the grinding tool.
4. S
ERvICE
4.1 P
reventive mAintenAnce
Without a tool clamped in check no-load
speed periodically and after each mainte-
nance. Even if the machine still operates
perfectly, the motor should be removed, cleaned and the
four slides checked for wear by a specialist after approx.
300 to 400 operating hours.
4.1.1 r
ePlAcement of the exhAust Air hose
Pull back on the ring to draw it off. Remove the exhaust
air hose. Flush mount the new exhaust air hose, and draw
the ring back on.
/ m
aINTENaNCE
4.1.2 r
ePlAcement of the suPPly hose
Remove the exhaust air hose (see 4.1.1).
Screw off the hose nut. Draw the air supply hose out of
the hose nut. Flush mount the new air supply hose in the
hose nut.
Screw the hose nut with air supply hose to the valve body.
17
Tabla de contenido
