Error Messages - Toya Vorel 81791 Manual De Instrucciones

Error messages

Error code Cause
402 Calculation error.
203 Low battery.
Temperature is too
301
high.
Temperature is
302
too low.
Back signal too weak
101 or measurement time
too long.
Back signal too
102
strong.
Workplace lighting
201
too strong.
Workplace lighting
202
too weak.
401 Hardware error.
This symbol indicates that waste electrical and electronic equipment (including batter-
ies and storage cells) cannot be disposed of with other types of waste. Waste equip-
ment should be collected and handed over separately to a collection point for recycling
and recovery, in order to reduce the amount of waste and the use of natural resources.
Uncontrolled release of hazardous components contained in electrical and electronic equip-
ment may pose a risk to human health and have adverse eff ects for the environment. The
household plays an important role in contributing to reuse and recovery, including recycling
of waste equipment. For more information about the appropriate recycling methods, contact
your local authority or retailer.
O R I G I N A L I N S T R U C T I O N S
GB
Solution
Repeat the measurement procedure according to
the instructions manual.
Replace the batteries or accumulators
Cool down the device.
Warm up the device.
Change the measurement area.
Change the measurement area.
Measure in a less illuminated room.
Measure in a more illuminated room.
Turn the device on and off several times. If the error
continues to occur, contact a service.
15