Mounting To The Antenna Mast; Trouble Shooting - Funkwerk Active antenna Manual De Instrucciones

Mounting to the Antenna Mast

Install the mounting brackets  supplied to the bot-
tom of the antenna with the screws supplied.
Now insert the loop clamps  through the lateral
holes of the mounting bracket. Tighten the mounting
bracket  [incl. antenna] with the loop clamps  to
the mast and align it to the transmitter mast.
Now continue as described in the Section „Within the House" [p. 26].

Trouble Shooting

Problem
Poor reception des-
pite UMTS connec-
tion being available
Note transmission direction!
Possible cause
The device is not
switched ON [sta-
tus LED OFF]
The coupling of the an-
tenna between the UMTS
data stick and the moun-
ting  is insufficient
28
Remedy
Check all connec-
tors / push plugs into
the power socket
Turn the UMTS data
stick by 180 degrees
around its lateral axis.