Idiomas disponibles
Idiomas disponibles
MCP-5452900-Bediene-0909.qxd
e Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
f Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
g Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
the work to be performed. Use of
the power tool for operations different
from those intended could result in a
hazardous situation.
5 Service
a Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This
will ensure that the safety of the
power tool is maintained.
b To avoid hazards, damaged power
leads must be replaced by the
manufacturer or his customer service
representative.
6 – Safety instructions
relating specifically to
the equipment
WARNING! Read the operating
instructions to lessen the risk of
injury.
Wear ear defenders.
60
30.09.2009 15:42 Uhr
• Only use the additional handle
supplied with the unit. Loss of
control may lead to injuries.
• Use the unit only for the applications
it is designed for.
• When operating the machine, always
hold it with both hands and ensure
that you are standing firmly.
• Sockets outside must be fitted with a
residual current circuit-breaker.
• Shavings or splinters should never be
removed when the machine is
running.
• Before starting to drill into a wall,
make sure that there are no
concealed power, water or gas lines
located at the drilling position.
• Small work pieces should be secured
in such a way that they cannot be
moved by the drill when drilling.
• Before carrying out any work on the
machine, when taking a break and
when the machine is not in use,
always pull the plug out of the socket.
• Always keep the power cable away
from the area you are working in.
• Only plug the machine into the socket
when it is switched off.
• Persons under the age of 16 may not
be permitted to operate the machine.
Seite 60
Wear a dust-protection mask.
Wear goggles.
Capítulos
