INPRO 5150 Instrucciones De Instalación página 15

2. Setting up speed warning function H
Press the button UP for at least 2 seconds to store the L-value
indicated on the display as warning speed. The system can only
store speed settings between 50 and 250 km/h.
If you press the button UP, and an H is displayed on your screen, then the speed warning function is deactivated.
If an H is displayed in combination with a number on your screen, e.g. H 250, then the speed warning function is
activated.
H250
Speed warning function High is
activated
The headup display exhibits an automatic dimmer function for the display: the illuminating power of the display adapts
iintself to the surrounding light conditions. Bright daylight increases the illuminating power to ensure the good readability
of the display. At night, the illuminating power of the display is reduced to avoid interferences with your driving.
The display contains a small photo cell for performing this automatic function. You can also deactivate this function and
manually perform the illuminating power adjustment.
Activating the automatic function:
Testing the automatic dimmer function:
Deactivating the automatic function:
Dimmer Function of the Display
- Switch the headup display to the speed display mode.
- Simultaneously press the buttons MODE and UP.
- The illuminating power of the display is reduced in low-light conditions.
- The illuminating power of the display increases in daylight conditions.
- Press the button SET twice.
- The manual function is activated, you can adjust the illuminating power
by means of the button SET.
SET
H
Speed warning function High is
deactivated
MODE DOWN UP
15