Technical Data; Scope Of Supply; Description Of The Device - INPRO 5150 Instrucciones De Instalación

Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
Page 16
Operating voltage:
Power consumption:
Operating temperature: -30°C - +80°C (-22°F - +176°F)
RPM:
Speed:
1 x Electronic controller
1 x Headup display
1 x 4-pole cable set
1 x Cable set for display
1 x Angle bracket
4 x Red cutting connectors
1 x Instruction bag with assembly material
1 x Reflector film
The headup display is an accessory display instrument which is suitable for evaluating RPM and speedometer
impulses and projecting appropriate data via a separate display. The projection takes place in digital form. The
system is simultaneously capable of projecting two freely programmable speed warning functions (e.g. 50 km/h in
town or 100 km/h out of town) by means of an audio signal and a flashing projection. In addition, the headup display
exhibits an automatic dimmer function with an integrated photo cell. The headup display can be installed in vehicles
with electrical or electronic speedometer impulses. It cannot be installed in vehicles with data bus technology.
10
Table of Contents
Table of contents, technical data, scope of supply, description of the device
Safety instructions
Disposal instructions, universal terminal diagram, universal installation
Control electronics, speedometer adjustment
RPM adjustment, speed warning function LOW
Speed warning function HIGH, dimmer function of the display
Service and hotline

Technical Data

10V - 15V
max 0.5 A
400 - 10000 U/min
0 - 400 km/h

Scope of Supply

Description of the Device