Starting The Engine - Pramac Powermate EM1200 Manual Del Usuario

Tabla de contenido
• Change oil if contaminated.
• Oil capacity:
EM1200 - 0,35
• Recommended engine oil: SAE 10W-40.
4. OPERATION
NOTE: ─────────────────────
The generator has been shipped without engine oil. Fill with oil.
────────────────────────
1)STARTING THE ENGINE
NOTE: ─────────────────────
• Before starting the engine, do not connect the electric
apparatus.
────────────────────────
1.Turn the fuel cock lever to "ON" (If available)
2.Turn the engine switch to "ON"
3.Turn the choke lever to the "│ │"position. Not necessary if the
engine is warm.
4.Pull the starter handle slowly until resistance is felt. This is the
"Compression" point. Return the handle to its original position and
pull swiftly. Do not fully pull out the rope. After starting, allow the
starter handle to return to its original position while still holding the
handle.
5.Warm up the engine.
6.Turn the choke lever back to the operating position.
7.Warm up the engine without a load for a few minutes.
liters
liters
- EM2800 - 0,5
Fuel cock lever
Starting handle
Tabla de contenido
loading

Este manual también es adecuado para:

Powermate em2800

Tabla de contenido