Technical Characteristics; Preparing The Appliance; Vacuum Cleaner - Ghibli & Wirbel M9 Uso Y Mantenimiento

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 29
EN
IT
Voltage
Motor power
Sound level
Vacuum
Recovery tank useful
capacity
Detergent
tank capacity
Dimensions
Weight
Accessories
TYPE OF USE
This appliance was designed for the spray
and extraction cleaning of any type of fabric,
carpet, car seats, floors etc.
It can be used as a vacuum cleaner and or
solid and liquid suction unit with the appropri-
ate accessories upon request.
It has only been designed for these purpos-
es.
DANGER:
The manufacturer can not be held respon-
sible for any damage due to improper or
incorrect use.
Any other use releases the manufacturer
from liability for harm to persons and/or
property and invalidates any warranty
condition.
IMPROPER USE
Do not use the appliance to:
-
Aspirate flammable, explosive, corrosive
and toxic substances.
-
Aspirate hot substances.
-
Do not use the appliance in liquid suction
mode to suction powder and vice versa.
Do not use the appliance in areas at risk of
explosion.

TECHNICAL CHARACTERISTICS

650 x 495 x 825 H mm
Single motor
See data plate
1200 W
60 dB(A)
240 mbar
35 l
17 kg
Ø 36 mm
THE APPLIANCE

Vacuum cleaner

For appliances equipped with suitable acces-
sories.
-
Release the levers (1 Fig. 1) and remove
the cover (2 Fig. 2) complete with the mo-
tor unit.
-
Remove the polyester filter (3 Fig. 3).
-
Check that the paper bag (4 Fig. 3) is in
place inside the appliance.
-
If the paper bag (4 Fig.3) is not present,
mount it as follows:
Release the cap (5 Fig.4)
Fit the plastic ring nut (6 Fig. 5) of the pa-
per bag into the nozzle (7 Fig. 5) until you
hear the ring nut click into the groove (8
Fig. 5)
-
Reassemble the polyester filter (3 Fig. 3).
-
Place the cover back on (2 Fig. 2) and
lock it using the levers (1 Fig. 1).
-
Insert, as far as possible, the sleeve (9
Fig. 6) of the suction hose into the nozzle
(10 Fig. 6) on the drum.
-
To release the sleeve (9 Fig. 7) turn the
lever (11 Fig. 7) clockwise and then pull
the sleeve outwards (9 Fig. 7).
-
Attach the extension (13 Fig. 8) to the
handle of the flexible hose (12 Fig. 8).
EN - 6
Double motor
1200 W + 1200 W
230 mbar
56 l
12 l
730 x 520 x 925 H mm
25 kg
Ø 40 mm
PREPARING
Tabla de contenido
loading

Este manual también es adecuado para:

M9 autoM12 autoCe 35/1 iCe 56/2 i

Tabla de contenido