How To Use - Hamilton Beach 80374 Manual Del Usuario

840137100 ENv00.qxd 4/5/05

How to Use

1. Before First Use: Clean coffee grinder.
2. Remove cover, if locked in place, by turning counter-
clockwise to unlock position, then lift straight up.
3. Twist grinding chamber clockwise to locked position.
(Refer to LOCKED symbol on back of unit.
LOCKED
Make sure that the grinding chamber is FIRMLY locked
into position. The grinding chamber will "click" when
locked into position.
4. Pour whole coffee beans directly into grinding chamber
and fill to desired level. Use the convenient cup markings,
which correspond to cups of brewed coffee.
5. Place cover onto grinder. Make sure the arrow on cover is
aligned with the unlock symbol on side of grinder. Turn lid
clockwise to locked position.
3:11 PM Page 4
UNLOCKED
4
6. Hold plug and pull slowly to release stored cord. Plug into
outlet.
7. Rotate Grind Setting Dial to select desired fineness of
grind:
PERCOLATOR coarse grind for French Press or percolators
DRIP medium grind for automatic drip coffeemakers
ESPRESSO fine grind for steam or pump espresso machines
NOTE: There are two additional settings that will yield
results in between the three shown.
8. Move Cup Selector Switch to total number of cups to be
ground.
SELECT CUPS
4 1-4
8 5-8
12 9-12
15
13-15
9. Press ON/OFF button and release once grinding has
begun. The coffee grinder will stop automatically when
grinding is complete. To stop grinding cycle at any time,
push ON/OFF button. If ON/OFF button is pressed again,
grinder will start from beginning of timed cycle.10.
Remove cover and grinding chamber from base. Pour
ground coffee into paper or permanent filter. A brush can
be used to remove remaining grounds.
11. When finished, unplug grinder. Clean grinding chamber
and rewind the cord. To rewind cord: turn base clockwise,
using either the interior finger grips or the outside of base.
NOTE: Grinder will only operate with cover in locked
position.
5