Lotus SMARTIME 50020 Manual De Instrucciones página 8

The product should not be worn in the
shower or sauna as steam may enter the
watch. Any water damage to the product due
to non-compliance of the instructions is not
covered by the warranty.
Ensure that the two pins of the USB cable are
not allowed to contact the conductor at the
same time, this may cause a short circuit and
burn out.
Charging Guide
Magnetic charging is as shown below via a
computer USB or 5V charger. It takes about 2
hours to fully charge the watch.
Connection between device
and mobile phone.
Firstly, download APP "Lotus SmarTime" and
install.
Using the browser to scan the QR
CODE
Swipe down on the watch display, tap the QR
CODE to enlarge it. Scan the code with your
mobile device and install the Lotus SmarTime
APP on your mobile phone.
During installation enable all
options for the APP.
• After installation, ensure Bluetooth is
enabled on your mobile phone and that
the watch is turned on.
• Open the APP.
• The first time you open the APP you need
to log in. You can choose either to register
an account or log in anonymously.
• If you choose to create an account, your
data collected by the watch will be saved in
the APP as soon as synchronized and the
history will be saved even if you delete the
APP or change device.
• If you choose to log in anonymously the
collected data will be deleted if you delete
the APP or reinstall.
• To connect the watch with the APP, choose
Device in the APP and tap "Connect
device". The APP will search for the watch
Lotus S5. When it appears in the list, tap
the name and the watch and the APP will
start to connect. Please accept when you
are prompted for pairing.
• Some Android phones need to turn on the
GPS to find the device.
How to set message notification
via phone's settings-APP
management, enable all option
on the "Lotus SmarTime".
Enter into the phone's Settings-Notifications
– Lotus SmarTime - Allow Notifications,
Click the button to open the permission.
Start the APP "Lotus SmarTime" / Device
/ App notification and select permission
accordingly.
How to operate if watch cannot
receive notifications?
1. Ensure the watch is connected to the APP
2. Ensure that the button for message push
is already turned on in the APP.
3. Please confirm whether the messages can
be displayed normally in the mobile phone
notification bar. If there is no notification,
please follow the instructions on how to
set up message notification to turn on the
notification for phone APP.
8