Lotus SMARTIME 50020 Manual De Instrucciones página 10

7.Settings
7.1 Vibration
The vibration option can be turned on or off
to receive information.
7.2 Wrist
Move your hand to brighten the screen, you
can turn on or off.
7.3 Brightness adjustment
There are three levels, low, medium and high.
7.4 Reset
Click and confirm to delete all watch records
and restore the factory settings.
7.5 Power off
Click and confirm to shut down the device.
7.6 About
You can view the Bluetooth address and
software version of the watch.
Watch face customization
1. The watch face can be defined by the user
by long pressing on the Device-Watch face
to enter into the watch face customization
menu. Swipe to right or left and tap again to
select.
2. In the APP, go to Device/Watch face/ and
tap selected watch face and tap "watch face"
to push the dial to the watch.
3. In the APP you can customize your watch
face. Select the custom watch face and tap
the camera icon to take or add a photo.
There are three optional time display modes
Select one mode. When content tap the
"Watch Face" to upload to watch.
By virtue of the regulations pursuant to the handling of waste products deriving from electronic and electrical equipment, end of lifecycle
watch making products must be selectively collected for processing. You may therefore dispose of your quartz watch making products
at any of our retail outlets or any other authorized collection point. The selective collection, processing, rating and recycling of these
products helps contribute to safeguarding the environment and protecting our health.
Disclaimer
The method of capturing the heart rate
through an optical sensor used by this LOTUS
watch does not reach the level of precision
and accuracy of a professional medical
device, nor can it guarantee the equivalent
stable readings. The watch cannot replace
a medical device in its function of detecting
or diagnosing pathologies, heart or other
diseases.
Consequently and with respect to this
function, the device is for recreational use
only. Multiple factors (including level of skin
contact, pigmentation, tattoos, sudden arm
movements etc) can alter the accuracy of the
data provided by the sensor. Please keep in
mind that the actual heart rate may be higher
or lower than the reading indicated by the
optical sensor at a given time.
If you suspect any anomaly, always consult
your doctor and in case of emergency,
immediately contact the emergency services
in your area.
Festina Lotus SA assumes no responsibility
for any claim that may arise from the use and
/ or interpretation that the user of the device
and / or third parties may make of the heart
rate information provided by their devices.
10