Ritter 0202 Manual Del Usuario página 9

• Disconnect and lock out the power supply to the floodlight. Allow the floodlight to cool down
sufficiently!
• Loosen the screw for the lens on top of the floodlight and swing the lens forward.
• Remove the illuminant from the packaging.
• Avoid touching it with bare hands since this causes grease stains which lead to overheating. Use
a clean, dry, lint-free cloth.
• Insert one end of the illuminant into the socket, press against it, and insert the other end of the
illuminant into the socket. Ensure that the socket is not damaged.
• Then close the lens and retighten the screw.
Cleaning
• Disconnect and lock out the power supply to the floodlight. Allow the floodlight to cool down
sufficiently!
• Clean with a dry or slightly moist, clean, lint-free cloth and a mild detergent if required. Do not
use cleaners that contain abrasives or solvents.
• Disconnect and lock out the power supply to the floodlight. Allow the floodlight to cool down
sufficiently!
• Clean with a dry or slightly moist, clean, lint-free cloth and a mild detergent if required. Do not
use cleaners that contain abrasives or solvents.
• If required, the illuminant can be cleaned with a lint-free cloth moistened with ethyl alcohol.
ATTENTION! After cleaning the illuminant with ethyl alcohol, it must be allowed to air dry for at
least 20 minutes.
Maintenance
If the lens is damaged it must be replaced immediately.
Clean any dirt from the housing or the lens immediately, since it could cause overheating.
WEEE-reference of disposal
In accordance with European defaults used electrical and electronics devices may no more be
given to the unsorted waste. The symbol of the waste bin on wheels refers to the necessity
of separate collection.
Please help with environmental protection and see to it that this device is given to the for
this purpose designated systems of waste sorting if you do not use it any longer.
GUIDELINE 2012/19/EU of the EUROPEAN PARLIAMENT AND the COUNCIL of July 04th 2012
about electrical and electronics old devices.
Warranty
During manufacturing this Ritter Leuchten product is passed through several quality testing sta-
tions which are set up with newest technology. Should nevertheless a defect arise, Ritter Leuchten
offers a warranty to the following extent:
1. The duration of the warranty is 24 months after the date of purchase.
2. The unit is either repaired or replaced by Ritter Leuchten free of charge or if it can be shown that
it has become unusable during the warranty period due to a manufacturing or material
defect.
3. The liability does not cover transport damages or dama ged incurred through defective
installation.
4. If Ritter Leuchten repudiates the warranty claim and no objection is made within 6 months, the
right to repair becomes timebarred.
5. In a warranty case the unit must be sent to the dealer or Ritter Leuchten together with the sales
slip and a short descripti on of the defect.
6. If there is no proof for a warranty liability being in place, any repair carried out will be invoiced.
GB
9