Proper Use; General Safety Instructions; Technical Data - Ritter 0202 Manual Del Usuario

Halogen floodlight with movement sensor
Operation and maintenance manual
Dear valued customer,
Thank you for purchasing our floodlight.
Before operating the floodlight, please read the following instructions for use carefully and keep
them in a safe place for future reference.

Proper Use

The floodlight is spray-protected, IP44 and for use outdoors.
The floodlight conforms with the appropriate European CE regulations.

General Safety Instructions

• must always be placed at least 1m away from the surface being illuminated – in particular, the
power cable must not be illuminated or come into contact with the metal housing – maintain the
specified minimum clearances.
• must always be given sufficient time to cool down – the floodlight housing can get extremely hot –
the power supply to the floodlight must always be disconnected and locked out before servicing,
e.g. for bulb replacement or cleaning.
• must only be used on flat, stable surfaces.
• use only with a sufficiently protected 230V~ installation.
• must not be used in rooms that represent an explosion hazard
(e.g. cabinetmaker's workshop, painting operation, or similar).
• must not be used in the immediate vicinity of flammable materials.
• must not be set up in the immediate vicinity of pools, fountains, ponds, or similar bodies of water.
must not be immersed in water or other liquids.
• must not be immersed in water or other liquids.
• must not be operated with wet hands; never look directly into the light source.
• must never be covered.
• must never be operated with an open housing, missing or damaged wiring compartment, or
missing or damaged lens.
• must never be sprayed or cleaned using a steam pressure cleaner since this can damage the
insulation and seals.
• must never be repaired by the user. Repairs must only be carried out by the manufacturer or an
authorized service representative.

Technical Data

• Type: 0202
• Type: 7050115A
• Type: 7050150A
• Type: HFGT120ABW
• Type: HFGT230ABW
• Voltage: 230V~, 50Hz
• Protection class: IP44
• Range max: Type: 0202, 7050115A, HFGT120ABW, HFGT230ABW= max. 10m
Type: 7050150A= max. 12m
• Response time: 5 sec.– 8 min
Output: max. 500W
Output: max. 150W
Output: max. 500W
Output: max. 150W
Output: max. 230W
Acquisition angle: 120°
Acquisition angle: 120°
Acquisition angle: 180°
Acquisition angle: 120°
Acquisition angle: 120°
GB
7