Tilt/Trendelenburg Assembly - Mizuhosi hana 6875 Manual Del Propietário

10.6 Tilt/Trendelenburg Assembly

Part number 6875-5036
1. Cover removal.
a. Remove top-bellows bolts.
b. Remove bottom-bellows bolts.
c. Remove ten #6 screws from top sheet metal cover.
d. Remove five 10-32 screws from top sheet metal cover.
e. Lift off sheet metal covers (bottom sheet metal covers remain but telescope down).
2. Disconnect the damaged table tilt/trendelenburg cylinder 24 VDC electrical connector.
NOTE: Tabletop will need stability from another person.
3. Remove four mounting bolts from damaged table tilt/trendelenburg cylinder.
MIZUHOSI 2009
Figure 50: Table tilt/trendelenburg assembly
68 NW0508 Rev. D