Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Installation
After unpacking the device check that no parts are missing.
Place Thermic Box in a dry place which is protected against splashing water. The device may not
be used in the open air and may not be exposed to rain.
It should not be placed directly adjacent to sources of heat such as heating, gas oven, and hot-
water pipes or under the blazing sun.
The Thermic Boxe must be installed in such a way that the air which is warmed up can escape
without problems. Keep the Thermic Box at least 10cm away from the wall for better ventilation.
The Thermic Box is equipped with two connections for connecting to the 12V mains = DC-net and
the 220-240V ~ AC-net.
Instruction for use
Your Thermic Box can be operated with 12V DC. Prior to connection check whether the voltage
indication on the rating plate is in accordance with the battery voltage.
Connect your cooling device using the supplied DC cord to plug in the cigarette lighter socket of
your car, boat or caravan as shown in the diagram below.
!
Note: Overvoltage could cause damage to the electronic of the units.
Operation from the mains
DC Working
In case you want to operate the Thermic Box indoors from the AC mains, please use the factory
approved AC/DC adapter.
AC/DC Working
Your Thermic Box is equipped with an integrated multi voltage power supply AC and can be
connected directly to the alternating current. Prior to connection check whether the voltage
indication on the rating plate is in accordance with the voltage to be connected.
- 10 -
Tabla de contenido
