Before First Use - Klarstein 10031348 Manual De Instrucciones

1. Clean the hot plate with a soft damp cloth. Place your hot plate on the level and stable surface near the
electrical socket.
2. Check that the voltage marked on the product corresponds with your supply voltage. Ensure the controller
is in the "OFF" position before plug in.
3. Always use flat bottom saucepans or containers that make close contact with the heating element. Ideally,
the saucepans or containers should be 18-20 cm in diameter. Keep the surface of the heating element
clean and dry.
4. Close supervision is extremely necessary when this hot plate is used by or near children or invalids. Never
operate this hot plate unattended.
5. If there is smoke for the first use, that is normal. To make the unit heat without any pot about 10 Minutes
before cooking..
1. Put water and/or food in the container (The total amount of water and /or food should not exceed 80%
of the container to avoid overflowing), put a lid on the container and place it on the hot plate.
2. Connecting to the power supply socket. Turn the switch from "OFF" TO "MAX" position and the indicator
light is on for working, the hot plate is in a state of heating.
3. Two points to be reminded by the user when using the new hot plate:
• When using this hot plate for the first time, there may be a smell of smoke coming from the surface of
the heating element. This is normal because of the invisible protective coating in production.
• Before the water is boiling, the indicator light on the hot plate may be temporary off due to the tem-
porary disconnection of the thermostatic control. This is a safety issue for the working on the hot plate.
4. When you have finished using the hot plate, turn the switch to "OFF" position and unplug it from the
socket. Wait until the appliance is completely cooled down before moving or cleaning.

Before first use

Use
8