Blaupunkt 5FS300SE0 Instrucciones De Uso página 31

5)a) Remove the upper cover of refrigerating chamber door,install the upper hinge sleeve,door signal line to
the other side and install the door upper cover,
Dismantle the stopper and sleeve pipe from the right bottom of freezing chamber door, take out another spare
stopper(for reversible door), and assemble the sleeve pipe and spare stopper on left bottom of door by screw
install the upper hinge sleeve , door signal line to the other side and install the door upper cover.
b)Dismantle the stopper and sleeve pipe from the right bottom of freezing chamber door, take out another spare
stopper(for reversible door), and assemble the sleeve pipe and spare stopper on left bottom of door by screw
Take off the sleeve pipe and hole caps on the freezing chamber door and mount it on the other side.
6)Put freezing door on bottom hinge and install middle hinge, hole caps
7) Take out the left top hinge , left top hinge cover from accessories package.
Put refrigerating door on middle hinge ,
terminal ① connect
cover. For the assembly of handle, please refer to chapter 2.2.
hinge cover
（The picture above is only for reference.）
door signal line
door upper cover
sleeve pipe
stopper
stopper screw
a
middle hinge
install
signal line terminal ② with
sleeve pipe
hole cap
top hinge.connect signal line
signal line terminal ③
31
sleeve pipe
stopper
stopper screw
b
terminal ④ with
install top hinge cover and hole
hole cover
signal line