Lcd Display; Remote Control; System Connections; Turning The Unit On/Off - camry Premium CR 1173 Manual Del Usuario

device (RCD) in the power circuit, with residual current rating not more than 30 mA. Contact
professional electrician in this matter.
15. Avoid getting the device wet.
16. The device may only be wiped with a dry cloth. Do not use water or cleaning fluids.
17. The device should be kept in a dry room.
DEVICE:
1. POWER ON/OFF STANDBY INDICATOR
4. TUNER CHANNEL - 5.AUX IN
8. CD STOP BUTTON / BLUETOOTH PAIR BUTTON
9. CD / BLUETOOTH PLAY / PAUSE / RADIO AUTO SEARCH BUTTON
10. CD / BLUETOOTH SKIP PREVIOUS / TUNE - BUTTON
11. CD / BLUETOOTH SKIP NEXT / TUNE + BUTTON
12. VOLUME CONTROL KNOB
14. CD DOOR OPEN / CLOSE BUTTON 15.CD DOOR 16.FM ANTENNA
17. HEADPHONE JACK 18.RIGHT SPEAKER CONNECTOR 19.LEFT SPEAKER CONNECTOR
20. DC POWER ADAPTOR 21.BATTERY COMPARTMENT DOOR

REMOTE CONTROL:

1. POWER ON/OFF STANDBY INDICATOR 2.DISC DIRECT SEARCH BUTTON
3. PROG. BUTTON 4. CD/USB TRACK DOWN OR TIME DOWN BUTTON, TUNER DOWN BUTTON.
5. EQUALIZER BUTTON 6.REPEAT BUTTON 7.X-BASS BUTTON 8.TRACK DOWN BUTTON
9. CD / BLUETOOTH PLAY / PAUSE / RADIO AUTO SEARCH BUTTON
10. CD / BLUETOOTH SKIP PREVIOUS / TUNE - BUTTON
11. CD / BLUETOOTH SKIP NEXT / TUNE + BUTTON
12.CLOCK SET 13.LCD DISPLAY 14.CD DOOR OPEN / CLOSE BUTTON
15. CD DOOR 16.FM ANTENNA 17. HEADPHONE JACK
18. RIGHT SPEAKER CONNECTOR 19.LEFT SPEAKER CONNECTOR
20. RANDOM BUTTON AND INTRO BUTTON 21.BATTERY COMPARTMENT DOOR
22. BT PLAY / PAUSE BUTTON 23.VOLUM UP AN DOWN BUTTON
24. CD PLAY / PAUSE BUTTON 25.CD STOP BUTTON

SYSTEM CONNECTIONS

Make sure to unplug the AC power cord is unplugged from the wall outlet before making any connections.
AC Power Connection
Plug the AC power cord into an available 230V~ 50Hz AC Outlet. Make sure the plug is securely inserted into the AC outlet.
Installing the Batteries for the Battery Back-Up
1. Remove the battery compartment door located on the bottom of the main unit.
2. Follow the polarity markings inside the battery compartment, and insert 2 x AAA batteries (not included) into the two battery slots located
in the battery compartment.
3. Replace the battery door.
NOTES:
· When replacing the back-up batteries, do not disconnect the AC power cord from the wall outlet. If you do, all the current date time and
alarm settings will be erased.
· If the unit will be left unplugged for a long period of time, remove the batteries to avoid any damage that may occur if the batteries leak
and cause corrosion.
Remote Control
The remote control operates on one CR2025 3V lithium battery (included in the remote). To activate the remote control, remove the
insulator tab inserted in the battery compartment.
If the remote operation becomes intermittent or unsatisfactory, replace the original battery with a new CR2025 3V lithium battery.
1.Press down on the compartment cover, slide out the battery holder from the remote control case.
2.Replace the battery making sure the battery is installed correctly. The remote will not work if the battery is installed with the wrong polarity.
CAUTION:
1.) Danger of explosion if the battery is replaced incorrectly.
2.) Replace only with the same or equivalent type battery.
3.) Insert the battery holder back into the battery slot.

TURNING THE UNIT ON/OFF

1. In Off (standby) mode, tap the POWER / STANDBY Button (A1,B1) on main unit or remote control to turn the unit ON. The unit will turn
on, the last selected input mode icon will show on LCD display.
2. To turn the unit OFF (standby), tap the Power On POWER / STANDBY Button (A1,B1) on main unit or remote control again. The LCD
DISPLAY will go dim and show the current time. The standby mode indicator lights.
2.SOURCE 3.TIME SET/MEMORY BUTTON
6.USB 7.TUNER CHANNEL +

13.LCD DISPLAY

5