8. Calibration; 8.1 Direct Calibration - Grundfos DME Serie Instrucciones De Instalación Y Funcionamiento

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

8. Calibration

It is important that the pump is calibrated after
installation to ensure that the correct value
(ml/h or l/h) appears in the display.
The calibration can be carried out in two different
ways:
Direct calibration.
The dosed quantity of 100 strokes is measured
directly. See section
Check calibration. See section
calibration.
The pump
performs
100 dosing
strokes
Operating display
Fig. 26
30
8.1 Direct
calibration.
8.2 Check
Operating display
Operating display
without changes
Set value.
See section
8.2
Tabla de contenido
loading

Tabla de contenido