Troubleshooting; Protecting The Environment - Black+Decker GTC18452PC Traducción De Las Instrucciones Originales

If it does interfere, remove the battery and use a fine toothed
file or sharpening stone to remove the nick. If you drop the
trimmer, carefully inspect it for damage. If the blade is bent,
housing cracked, or handles broken or if you see any other
condition that may affect the trimmer's operation contact your
local BLACK+DECKER Service Center for repairs before
putting it back into use. Fertilizers and other garden chemicals
contain agents which greatly accelerate the corrosion of
metals. Do not store the unit on or adjacent to fertilizers or
chemicals. With the battery removed, use only mild soap and
a damp cloth to clean the unit. Never let any liquid get inside
the unit; never immerse any part of the unit into a liquid. Pre-
vent the blades from rusting by applying a film of light machine
oil after cleaning.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new
u
plug.
Connect the blue lead to the neutral terminal.
u
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 5 A.

Troubleshooting

Problem Possible Cause
Slow running, Dry, corroded
noisy or hot blades.
blades.
Blade or blade
support bent.
Bent or damaged
teeth.
Loose blade
bolts.
Unit will not Battery not
start. installed properly.
Battery not
charged.
Lock off not fully
operated.

Protecting the environment

Possible Solution
Lubricate blades.
Straighten blade or
Products and batteries contain materials that can be
blade support.
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
Straighten teeth.
local provisions.
Tighten blade bolts.
Check battery instal-
lation.
Check battery charg-
ing requirements.
Check lock off is fully
depressed prior to
moving main trigger.
(Original instructions)
Troubleshooting
Battery won't Battery not
charge inserted into
charger.
Charger not
plugged in.
Surrounding air
temperature too
hot or too cold.
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
ENGLISH
Insert battery into
charger until green
LED appears.
Charge up to 8
hours if battery
totally drained.
Plug charger into
a working outlet.
Refer to "Important
Charging Notes" for
more details. Check
current at receptacle
by plugging in
a lamp or other
appliance. Check
to see if receptacle
is connected to a
light switch which
turns power off when
you turn out the light.
Move charger and
tool to a surrounding
air temperature of
above 40 degree F
(4.5°C) or below 105
degree F (+40.5°C).
9