Central Display - hager tebis TX460 Manual De Empleo

XP1_TX460_6T7269a.qxd

4.2 Central display

The environment control and regulation display provides
the following information:
1
3
7
1 Current time
2 Outside temperature (available only if the installation
includes an outside temperature probe)
3 +
3. -
4 Room temperature
5 Temperature set-point value
6 Current temperature set-point value:
= Comfort set-point value
= Eco set-point value
= Reduced set-point value
= Frost-free set-point value (in Heating mode)
= Equipment Protection set-point value (in Cooling
mode)
7 Specific modes:
= Current Permanent Forced Operation (set-point value
is locked except forced Comfort position)
= Current Time Delay (set-point value is active until
time delay is out)
= Active scene (set-point value or temperature level
requested by a scene)
= Heating or cooling OFF
8 = Programmed Alarm clock
20/10/05
indicates a heating request
indicates a cooling request
81
13:44 Page 81
Description of Thermostat mode
2
5
4
6
8