HumanTechnik SWING IR Instrucciones De Servicio página 42

Symptoms
Receiver does not
work – no sound
received.
The sound transmis-
sion is bad, noisy or it
is distorted.
The sound transmis-
sion is distorted.
The battery only lasts
a short time before
needing recharging
English 42
Cause
Receiver is not
switched on.
(SWING IR LR)
No battery in receiver.
Battery in receiver is dis-
charged or not charged.
No visual connection
from the receiver to the
sender or too far away
from the sender.
The battery is almost
exhausted.
The device is operated
together with a plasma
TV set. Plasma TV sets
interfere with the infrared
transmission.
Battery is not completely
charged or defective.
Resolution
Switch the receiver on
by using the ON/OFF
switch on the back.
(SWING IR LR)
Insert battery in receiver.
Charge battery or insert
fully charged battery.
Remove obstacles from
the front of the sender
or align the front of the
sender to the receiver.
Align the receiver closer
to the sender.
Charge battery or insert
fully charged battery.
Use SWING digital.
Charge battery or insert
new or fully charged
battery.