Uline H-7825 Guia De Inicio Rapido página 2

4. Place top reading surface, middle shelf and bottom
panel onto side panel. Camlock pins (A) will be
inserted into holes while camlocks and dowels (C)
will be inserted into the empty holes. Repeat for front
panel. Tighten camlocks (B) using a Phillips head
screwdriver. (See Figure 3)
NOTE: Camlock caps can be applied once
camlocks are tightened for a finished look.
Figure 3
PAGE 2 OF 6
ASSEMBLY CONTINUED
5. Insert camlock pins (A) and dowels (C) into the
remaining side panel. Place this side panel on
top of the assembled portion of lectern. Tighten
camlocks (B) using a Phillips head screwdriver.
(See Figure 4)
6. Attach casters (D) to underside of bottom shelf using
four M4 x 16 machine screws (G). (See Figure 4)
7. Attach L-Brackets (I) to underside of bottom shelf
using six M4 x 16 wood screws (J). (See Figure 4)
1-800-295-5510
uline.com
NOTE: Ensure locking casters are installed
toward back of lectern, while casters without
lock are installed toward front.
Figure 4
D
D
G
E
J
I
0821 IH-7825