Rhin-O-Tuff HD7700/H Manual De Usuario página 13

u
HD7000, HD7100 and HD6500 Manual Reverse
utilizes a reversing tool supplied with the punch.
Turn the machine power switch off and
unplug the power cord from the wall outlet.
Remove the paper waste drawer and locate the silver plug in the front
panel of the machine. Remove the silver plug by prying it out gently with
a small flat tool. Insert the end of the reversing tool into the open hole
and engage the tool with the end of the motor shaft. Rotate the tool
clockwise 5-10 revolutions, until the punch pins have been retracted back
to their starting position. Remove all of the material from the punch.
It is easier to remove one or two sheets at a time
from the backside of the material in the punch.
Remove the reversing tool from the punch and replace the
silver plug. Replace the paper waste drawer, plug the
power cord back in to the wall outlet and turn the power
switch on. Test cycle the machine by punching with no material in the
punch, the machine will reset itself back to its home position. Reduce the
amount of material being punched and continue working.
HD7700/H, HD7650, HD7000 Plus and HD6700
Manual Reverse utilizes a reversing tool supplied
with the punch.
switch off and unplug the power cord from
the wall outlet.
left side panel of the machine. Remove the silver plug by prying it out
gently with a small flat tool. Insert the end of the reversing tool into the
open hole and engage the tool with the end of the motor shaft. Rotate
the tool counter-clockwise 5-10 revolutions, until the punch
pins have been retracted back to the starting position.
Remove all of the material from the punch.
It is easier to remove one or two sheets at a time from
the backside of the material in the punch.
Remove the reversing tool from the punch and replace
the silver plug. Plug the power cord into the wall outlet and turn the
power switch on. Test cycle the machine by punching with no material in
the punch, the machine will reset itself back to its home position. Reduce
the amount of material being punched and continue working.
Turn the machine power
Remove the silver plug from the
11
!
WARNING
Crush hazard.
Keep hands away
from moving parts.
Lockout and disconnect
power before servicing.
!
WARNING
Crush hazard.
Keep hands away
from moving parts.
Lockout and disconnect
power before servicing.