GRAPHITE 58G970 Manual Del Usuario página 10

TRANSLATION OF THE ORIGINAL INSTRUCTIONS
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL CAREFULLY AND KEEP IT FOR FUTURE
REFERENCE.
●
Use dust-masks when cutting to protect your respiratory system against produced dust.
●
Carefully check the processed material before cutting to eliminate possibility of cutting nails, bolts, or
other hard objects.
●
Do not cut objects thicker than allowed in technical specification for a given material.
●
Prior to operation check if there is enough space under processed material to avoid table or floor
damage with the blade.
●
Hold the saw with both hands.
●
Ensure the saw blade does not have contact with the material before pressing the switch.
●
Do not touch moving parts with your hand.
●
Before cutting floor, wall or other material make sure it does not contain electrical wires.
●
Do not put away the saw until it stops moving. Do not switch the saw on when not holding it with your hand.
●
To remove the blade, first switch the saw off with the switch and wait until the blade stops moving.
Disconnect the saw from power supply.
●
Do not touch the blade or processed material immediately after the work has been finished. Those
elements may be hot and may cause burns.
●
When you see unusual behaviour of the tool or hear strange noises, immediately switch off the tool and
remove the plug from mains socket.
●
To ensure proper cooling keep ventilation holes in the saw body uncovered.
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures and additional safety systems are used,
nevertheless there is always a small risk of operational injuries.
CONSTRUCTION AND USE
Reciprocating saw is a hand-held power tool with insulation class II. It is driven by a single-phase commutator
motor. The tool is designed for making straight, coarse cuts, curved cuts and holes in wood, wood-based
materials, plastics and metals (provided that appropriate blade is used). Range of use covers repair and
building works, and any work from the range of individual, amateur activities (tinkering).
Use the power tool according to the manufacturer's instructions only.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the drawing pages of this manual.
1. Blade
2. Blade holder
3. Carbon brush cover
4. Switch lock button
5. Switch
6. Footplate fixing screws
7. Footplate
* Differences may appear between the product and drawing.
MEANING OF SYMBOLS
CAUTION
WARNING
RECIPROCATING SAW
58G970
DETAILED SAFETY REGULATIONS
10