Electrical Connection - Master MS Seeds Manual De Uso Y Mantenimiento

Transport

Electrical connection

Placement
and under any circumstances should be exposed to moisture or water. The electrical system must be kept always dry.
Operation
MS Seeds Circuit
The MS Seeds is designed to carry out the entire process of shelling, cleaning and sizing. The intervention of the
operator is necessary in the initial phase for the introduction of cannabis into the sheller and in the second phase to
regulate it according to the variety to be processed and the conditions of the raw material.
The purpose of the ventilation system is to clean the seeds from any plant material and the worm shaft conveys the
+ Phase 1. Introduction of the raw material and shelling.
hopper of the MS Seeds machine. Must allow a time interval between loads for the sheller to perform its function,
otherwise, the machine might get clogged. Once inserted, the cannabis is processed by the shelling system, consisting of
a stainless steel grid and food silicone joints.
IMPORTANT: the material to be processed must only consist of very dry cannabis, otherwise adding damp material
the MB Bucker 500 machine to remove stems.
+
of cannabis variety and seed size.
In the separation phase, the plant material is separated by the ventilation system and will remain perfectly stored
Regulate the machine according to the variety to be processed: start with a moderate speed and gradually insert the
material condition.
RECOMMENDATION
the second pass, you perform more thorough cleaning.
+ Phase #3. Separation by size. In the last phase of the production line, the seeds are driven by the worm shaft to a stain-
of plant material to leave the seeds completely clean.
16
Box 80 x 145 x 127 cm = 168 kg // MS Seeds Net weight = 80 kg
230 V 50/60 Hz monophase power supply.
Separation of the seeds is performed with adjustable power ventilation
-