Trevi SLD 3880 Manual De Usuario página 3

English
FUNCTIONS DESCRIPTION
1. Clock
2. Timer function indication minutes/countdown
3. Alarm time
4. Temperature
5. Switch setting hour/alarm, alarm ON/OFF.
6. HR button, hour adjustment
7. 5 button, 5min progress. Setting for "countdown"
8. SNOOZE/LIGHT button, deactivate alarm/backlight command
9. 15 button, 15min progress. Setting for "countdown"
10. MIN button, minutes adjustment
11. 60 button, 60min progress. Setting for "countdown"
12. CLEAR button, delete time "countdown"
13. Battery compartment 2xAA batteries (not included)
POWER SUPPLY
Open the battery compartment (13) on the back of the unit and insert two
batteries "AA" according to polarity.
When inserting the batteries, the clock turns on and it plays a short beep
sound.
SETTING THE CLOCK
1. Under normal displaying mode, set the shift switch at the position of
'Time set'. The hour and the minute will be flashing.
2. Press 'HR' button to adjust the hour (only upwards).
3. Press 'MIN' button to adjust the minute (only upwards).
4. Set the shift switch at the position of 'AL ON' or 'AL OFF' to confirm the
setting.
SETTING AND ACTIVATING ALARM
1. Under normal time display, set the shift switch at the position of 'AL Set'.
The hour and the minute at the alarm corner will be flashing.
2. Press 'HR' button to adjust the hour (only upwards).
3. Press 'MIN' button to adjust the minute (only upwards).
4. Set the shift switch at the position of 'AL ON' to confirm the setting and
turn on the alarm function. There would be an icon of
alarm corner.
5. When the alarm ring is on:
- Press any other button to cancel the alarm sound. The alarm will be
on again after 24 hours.
- Press the SNOOZE/LIGHT button(8) to activate the snooze fun-
ction.
SNOOZE FUNCTION
With activat alarm, snooze function allows repetition of ringer more times
after it suspended with the SNOOZE/LIGHT button(8).
- When alarm ring is on, press 'SNOOZE•LIGHT' button to turn off the
sound, the icons of and
again after 5 minutes.
- When the snooze function is on, press any other button to turn off the
snooze function.
←
display at the
will flash, the alarm sound will be on
DEACTIVATING ALARM
To deactivate the Alarm function, bring the selector (5) to "AL OFF", the icon
to the side of the alarm time disappear.
TIMER FUNCTION/COUNTDOWN
There are three timer buttons: 5, 15, 60
The button '5' means 5 minutes. The button '15' means 15 minutes. The
button '60' means 60 minutes. The countdown time could be added.
E.g.: press twice '5', means 10 minutes.
The maximum is 360 minutes. Once the setting hour is more than 360
minutes, it would clear and restart the timer from the just setting minute.
The alarm sound will last for 2 minutes, and will change as below:
0-10 seconds: BI per second
11-20 seconds: BI BI per second
21-30 seconds: BI BI BI per second
>30 seconds: Keep BI
The timer would be started once you press any timer button.
Press 'CLEAR' button to stop and clear the timer.
Once the timer and normal alarm meet the same time, there would be no
conflict.
TECHNICAL DATA
Power Supply: ....................2xAA, 1,5V
SLD 3880
3