Idiomas disponibles
Idiomas disponibles
260 mm (10.24")
English
Use the correct size and type of
screws and wall anchors – taking
into account the construction and
condition of the wall. Use 2 screws
(ø 4 mm, 0.16") and wall anchors
each with a minimum load rating
of 2.5 kg (5.5 lbs).
Special notice about light partition
walls
If you intend to hang the product
on a gypsum wall (also known as
drywall or wallboard), the wall
bracket must be fastened to a
vertical stud. Mounting was
evaluated for use on a drywall
surface.
Use 2 round-head screws with a
diameter of 4 mm (0.16") and a
length of 50 mm (2").
1 screw must penetrate the
gypsum and be screwed a
minimum of 25 mm (1") into a
vertical stud.
Furthermore mount 1 screw and 1
suitable anchor of a type intended
for gypsum walls.
The screws should be tightened
until the distance between the
bottom of the head and the
drywall surface is 4 mm (0.16").
7
