Dyson SV17 Manual De Instrucciones página 7

Charging and storing
your machine
It's important to fully charge your new machine before
using it for the first time, and after every clean. This is
because the battery and monitoring system's algorithm
3-4.5hrs
'learns' over time, and fully charging your machine
helps it to more accurately calculate and display
remaining run time.
Connect to the charger either directly
or in the docking station.
The blue LEDs on either side of the
battery will flash during charging.
When the battery is fully charged,
both LEDs will light for 5 seconds.
Your battery is fully charged when
the display shows 100%.
Emptying your clear bin
2
Be careful not to pull the power trigger
while the clear bin is open for emptying.
100%
Your machine won't operate or
charge if the ambient temperature is
below 5°C (41°F). This is designed to
protect both the motor and battery.
The recommended temperature
range for storage, operating and
charging your machine is between
18°C (64°F) and 28°C (82°F).
Changing your battery
Where you have additional batteries, we
recommend that you alternate the batteries to
maintain even performance.
To remove a battery
Hold your hand under the
battery to support it.
Press the battery release
button and slide the battery
off the handle.
Place the battery on charge.
1
3
clik
Close the clear bin by pushing the bin base
upwards until the clear bin and bin base click
into place.
clik
To install a battery
Slide the battery onto
the handle until it clicks
securely in place.
clik
7