• Always observe the notes on operation (section 4), cleaning and
maintenance (section 5) and storage (section 6).
3. Proper Use
CAUTION
This heated underblanket is designed for warming beds, only.
4. Silver particle finishing UB60, UB66XXL
The upper side of this heated underblanket (printed side) is finished with silver particles. This special finishing
improves hygiene by reducing the build-up of odour and bacteria. The underblanket can be washed as
described and the finishing will not wash out.
5. Operation
5.1 Safety
CAUTION
This heated underblanket is equipped with a SAFETY SYSTEM. This sensor technology prevents the
entire surface of the heated underblanket from overheating by automatically switching off the heated
underblanket in the event of a fault.
If the safety system has switched off the heated underblanket, the temperature setting is not illuminated
any more even when the heated underblanket is switched on.
Please note that the heated underblanket is not operable any more due to safety reasons in this case
and has to be sent to the service address indicated.
5.2 Putting into operation
Spread out the heated underblanket flat onto your mattress starting at the foot end.
Then put on your bedsheet in the usual manner so that the heated underblanket is between your mattress
and the bedsheet
CAUTION
Make sure that the heated underblanket is spread out entirely flat and that it will
not rumple up or crease when in use.
• To operate the heated underblanket connect the controller to the heated underblanket
by plugging in the connector.
• Then plug in the supply plug into the mains outlet.
NOTE:
Lie in comfort
If the plug-in connector at shoulder level bothers you, you
can rotate the electric underblanket by 180° so that the
plug-in connector lies at the foot of the bed (see illustra-
tion). So that the switch is within comfortable reach of
your hand, Beurer offers a switch with a longer connection
cable (Art.-no. 108.584). This is available directly from
Beurer Customer Services.
13