Message Codes - Instrumax SNIPER 50 PLUS Manual Del Usuario

8
Press button (1) to take distance measuring
triangle) . The result of the function is displayed in the sec-
ond line.
The result of the measurement is displayed in the second
line.
Timer
Use Timer for accurate measurement of big distances. Press
and hold button to set the delay in 5 sec. When you release
the button, you will see time (in sec) on the display. This
time shows how many seconds we have to start the mea-
surement. Time reading of last 5 seconds goes with sound
alarm. The instrument will start the measurement after the
last sound alarm.

MESSAGE CODES

All message codes are displayed with either "Info" or
symbol telephone receiver (Error). Following mistakes can
be corrected.
(side of the
INFO
204
252
253
255
256
257
258
CAUSE
Calculation overlow
Repeat procedure
Temperature too
high
Temperature too low Warm up instrument
Receiver signal too
weak
Received signal too
strong
Wrong measure-
ment
Wrong initialization Switch on – off the
REMEDY
Cool down instru-
ment
Use target plate
Use target plate
(grey side)
Use target plate
(brown side)
instrument