Measuring Conditions - Instrumax SNIPER 50 PLUS Manual Del Usuario

10

Measuring conditions

Measuring range: the range is limited to 50 m. At night, at
dusk and when the target is shadowed the measuring range
without target plate is increased. Use a target plate to in-
crease the measurement range during daylight or if the target
has a bad relection.
Measuring Surfaces
Measuring errors can occur when measuring toward color-
less liquids (e.g. water) or dust free glass, styrofoam or sim-
ilar semi-permeable surfaces. Aiming at high gloss surfaces
delects the laser beam and measurement errors can occur.
Against non-relective and dark surfaces the measuring time
can be increased.
Precautions
Please, handle the instrument with care.
Avoid viabrations and hits.
During transportation put the instrument into the soft bag.
Note: the instrument should be dry!
Care and cleaning
Do not immerse the instrument in water. Wipe off dirt with a damp,
soft cloth. Do not use aggressive cleaning agents or solutions.
Speciic reasons for erroneous measuring results
- Measurements through glass or plastic windows;
- Dirty laser emitting window;
- After instrument has been dropped or hit. Please check the
accuracy.
- Large luctuation of temperature: if instrument will be used
in cold areas after it has been stored in warm areas (or the
other way round) please wait some minutes before carrying
out measurements.
Electromagnetic acceptability (EMC)
It cannot be completely excluded that this instrument will dis-
turb other instruments (e.g. navigation systems);
will be disturbed by other instruments (e.g. intensive electro-
magnetic radiation nearby industrial facilities or radio trans-
mitters).