Tabla de contenido
Idiomas disponibles
Idiomas disponibles
• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a fire.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
• Do not use a battery pack or tool that is dam-
aged or modified. Damaged or modified batteries
may exhibit unpredictable behavior resulting in fire,
explosion or risk of injury.
• Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or tem-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging
improperly or at temperatures outside the specified
range may damage the battery and increase the risk
of fire.
SERVICE
• Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES
FOR GREASE GUN
• High pressure can cause some tool parts or hose
assembly to rupture, posing a risk of injection
injury and/or amputation. Inspect tool and hose
assembly for damage or wear before each use. Do
not use if damaged or worn.
• Do not operate without proper safety apparel,
including eye protection marked to comply with
ANSI Z87.1, and gloves.
• Hold Hose Assembly by spring strain relief to
avoid kinking the hose.
• Grease and lubricants may be flammable. Do not
expose to flame or heat source. Follow all warnings
and instructions from grease and lubricant manu-
facturer.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
•
Some dust created by power sanding,
WARNING
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
filter out microscopic particles.
SYMBOLOGY
Volts
Direct Current
psi
Pounds per Square Inch
Read Operator's Manual
UL Listing for Canada and U.S.
C
US
SPECIFICATIONS
Cat. No. ..................................................... 2446-20
Volts.............................................................. 12 DC
Battery Type .................................................M12™
Charger Type................................................M12™
Max. Operating Pressure...........................8150 psi
Flow Rate* ........................... 2.6 oz/min at 1000 psi
Cylinder Capacity ....... 16 oz bulk/14.5 oz cartridge
Hose Rating ............................................10,000 psi
Recommended Ambient
Operating Temperature ......................0°F to 125°F
*Using MILWAUKEE XC battery pack
FUNCTIONAL DESCRIPTION
1. Handle
2. Trigger
3. Loader coupler
4. Hose Assembly
5. Bleed valve
6. Strain relief
9
8
6
3
7. Hose clamp
1
8. Cylinder
9. Rod handle
2
3
7
5
562 bar
690 bar
6
4
Tabla de contenido
